No. The glass bottle is designed to be used solely with the Carbonator Pro. The glass bottle is not compatible with Carbonator 3.

The reason is that any product involving the use of gas and pressure systems in combination with glass, requires a chamber covering the glass bottle during the carbonation process. The Carbonator 3 does not have a chamber (since it is not necessary for a sparkling water makers developed for a PET bottle). A glass bottle should never be used in the Carbonator 3!

No. The Aarke Glass Bottle Pro is designed for, and can only be used with, the Aarke Carbonator Pro.

No. As long as the bottle’s structural integrity is intact, and it doesn’t have any cracks or damages, it can be used without regard to any expiration date.

Yes, you can clean the Aarke Glass Bottle Pro in the dishwasher. It can withstand a temperature of up to, and including, 70° C, so please do not use a dishwasher program with a higher temperature than that.

At the moment, gas cylinders are not included with the purchase of the Aarke Carbonator.

Our machine is compatible with AGA, Sodastream (except for Sodastream Quick Connect), Linde, SodaMagic, Vikingsoda, and other standard 400-425g/60l cylinders for sparkling water makers.

Please note that standards in Australia and New Zealand are different, and Carbonators sold in these countries are not compatible with EU, US, or Asian cylinders. For these machines, we recommend Australian Sodastream and Soda King cylinders.

400-425g/60L gas cylinders are widely available on Amazon.

Depending on your location, you can also buy and refill these gas cylinders at your local supermarket.

Carbonator 3 is a sparkling water maker with a PET bottle. The Carbonator Pro is designed and engineered for carbonating water with a glass bottle and is therefore equipped with a protective stainless-steel cover. Compare our Carbonator 3 and Carbonator Pro models here.

Yes. Once you have pressed down the cover to encapsulate the glass bottle, you push the top button to carbonate. To add more bubbles, just push the button again – and a third time to increase the level of carbonation even more.

No. Carbonator Pro is designed for carbonating water only. Carbonating any liquids other than water can damage the machine’s mechanisms. Therefore, please only carbonate pure water – and add flavourings, fruit, or ice in a separate container after the carbonation, e.g., in a carafe or a glass.

No. You should never carbonate with a damaged bottle. Before carbonating your water, make sure the bottle is intact and without any scratches or cracks. If you are unsure of the bottle's condition, please reach out to our Support Team and we will help you with this.

Yes. Since glass is a more dense and impermeable material than plastic, it has the ability to hold carbonation even better.

It’s normal and expected that a small amount of water gathers in the drip tray after carbonation. This happens because the machine’s mechanism is designed to release extra water, which might get sucked up with the gas when the handle is released after carbonation.

To minimise the amount of water we would recommend you to:

- Check that you are filling the bottle precisely to the filling line.

- After carbonating the water, push down the release handle halfway to let the valves evacuate the excess gas at a slower rate. Optimally, you allow the “psshhh”-sound to last for 2-3 seconds. Then continue to press the handle all the way down to raise the cover.